I developed a sort of "warming blanket" setup to go above the bed. You will need: a 4-meter length of cord, a 4x4 m tarp, and a 2.1 x 1.5 m "woobie" (poncho liner/blanket). See photos below. Instructions – see photo below. Run the cord lengthwise, positioned above the middle of the bed at a height of about 60 cm. Secure one end of the cord to something outside the bed area. Thread the cord through three of the tarp’s attachment loops, leaving a portion of the tarp hanging freely at both ends. Attach a thin wire to those three tarp loops, and thread the other end of the wire through the reinforcements of the tarp’s loops—this allows you to hang the "woobie" blanket (using its own ties) from the wires, underneath the tarp. Then, pull the tarp (which is now doubled over) and the enclosed "woobie" blanket across to the other side of the bed. Because the "woobie" blanket hangs freely from the cord, it causes the tarp to curve inward, as sho...