Floor warming innovation

 



Floor warming innovation

Here is an innovation for floor heating.


It consists of a chimney-like component—11 mm in diameter with a wall thickness of a few millimeters—topped with a lid. The lid features three small holes along its edge, allowing flue gases to escape while keeping the heat generated by the candle contained within the tube. The heat source is a 6-hour tea light; it must have a metal casing—plastic casings are not suitable, as they would melt.


The lid becomes too hot to touch, though the sides can be handled briefly. In other words, it is no hotter than a standard candle lantern.


The device is placed atop a twig stove, with a gap of a few centimeters between the stove and the floor to allow for air circulation.


The principles behind this floor-heating method are as follows:


Because the exhaust openings for the flue gases are small, the heat remains trapped inside the tube; this, in turn, heats the steel base of the twig stove, which sits beneath the candle.


There are two fundamental rules of thermodynamics at play here:


1. Heat tends to rise.


2. A cold surface absorbs heat.


Both principles apply to this device.


In this setup, the cold floor beneath the unit absorbs the heat, drawing it into the flooring.


If there is a concrete slab underneath, it not only stores the heat but also distributes it across the floor area.


Since the candle burns for 6 hours, it has ample time to heat the concrete slab.


In short, this is a clever way to provide a degree of floor heating in your home at a very low cost.


Siinä on lattialämmitys innovaatio.

Se on muutaman millin paksuinen halkaisijaltaan 11 mm savupiipun osa - jonka päällä on kansi jossa on reunoissa kolme pientä reikää joista savukaasu pääsee ulos - mutta kynttilän tuottama kuumuus pysyy putken sisällä. Kynttilänä on metallikuorinen - ei saa olla muovikuorinen sillä se sulaa - 6 tuntia palava lämpökynttilä.

Tuon kansi kuumenee niin ettei siihen voi koskea mutta kylkiin voi hetken aikaa. Eli se ei ole normaalia kynttilälyhtyä kuumempi.

Se on sijoitettu risukeittimen päälle niin että keittimen ja lattian välillä on n sentin rako jossa ilma vaihtuu.

Tuon lattialämmitysperusteet on tässä.

Kun savukaasujen ulostuloaukot on pienet jää kuumuus putken sisälle - silloin lämpiää myös kynttilän alla oleva risukeittimen teräspohja.

Termodynamiikassa on kaksi perussääntöä

1. Lämpö pyrkii ylöspäin

2. Kylmä pinta imee lämpöä

Ja ne pätee myös tuohon laitteeseen.

Mutta niin että kylmä lattia alla imee laitteen lämpöä lattiaan.

Ja kun alla on betonilaatta niin se paitsi varaa lämpöä niin myös levittää lämpöä lattian alla.

Ja kun kynttilä palaa 6 tuntia niin tietenkin se lämmittää betonilaattaa siinä ajassa.

Tämä on siis oivallus jolla saat asuntoosi hyvin halvalla lattialämmitystä ainakin hieman.

Kommentit

Tämän blogin suosituimmat tekstit

Searching instrumentalist to be feat artist to my improvisations

Pelkällä urheilukentän päällysteen hinnalla saisi joka kuntaan ostettua aktiivisille kulttuurinharrastajille omat tilat